Table of Contents
Advertisement
6.6 Parameter setting
It allows you to carry out the parameter setting such as time, key lock, etc., as required.
Items to be set are as follows:
Description of setting items
* For the maintenance mode, see Section 6.7.
(1) Enter the "Parameter setting" screen from
the user mode, and the display shown
at right appears. Operate the
key until the cursor is aligned with a
desired item and press the
(2) In the "Parameter Setting" screen that
appears, perform the value entry or the
setting. For the value entry or setting
change , use the
key move the cursor to the right.
To close Parameter Setting screen
To close the "Parameter Setting" screen
or cancel this mode midway, press the
ESC
key. A previous screen will return.
INZ-TN2ZPA-E
or the
key.
ENT
or the
key, and the
51
ENT
(
)
ENT
End of Parameter Setting
Advertisement
Table of Contents
