Wiring - Fuji Electric ZPA Instruction Manual

3.5 Wiring

CAUTION
• Be sure to turn off the power before installing wiring. Otherwise, electric shock may result.
• Be sure to perform protective earth connection. Otherwise, electric shock or failure may
result.
• Select a proper wiring material that satisfi es the ratings of the instrument. Otherwise, elec-
tric shock or fi re may result.
• Be sure to connect a power supply of correct rating. Otherwise, fi re may result.
CAUTION
Electric Shock
Please be sure to make ground (grounding) connection for safety.
Attention
Choc électrique
Pour des raisons de sécurité, veillez à assurer la mise à la terre de l'équipement.
The power terminal block at the power inlet and external input/output connector is provided at the
rear panel. Refer to the following.
External input connector (A/I)
Communication connector (RS-485)
Analog output connector (A/O)
Digital input/output connector
(DIO 1 to 3)
12
Power inlet
Power terminal block
INZ-TN2ZPA-E