Snmp Traps Screen - Cabletron Systems 6E122-26 User Manual

Chapter 5: Local Management
5.17

SNMP TRAPS SCREEN

Since the 6E12X-26 and 6E13X-25 are SNMP compliant devices, they
can send messages to multiple Network Management Stations to alert
users of status changes. The SNMP Traps screen is shown in
It is only necessary to assign SNMP traps if the user desires
NOTE
the traps to be sent to different addresses than those assigned
in Section
6C105 chassis.
Access the SNMP Traps screen from the Module Configuration Menu
screen by using the arrow keys to highlight the SNMP TRAPS field and
pressing ENTER. The SNMP Traps screen displays.
Event Message Line
Module Type: 6E122-26
Slot Number: X
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
5-60 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
5.9, which details how to set SNMP Traps for the
6E122-26 LOCAL MANAGEMENT
SNMP Traps
Trap Community Name
public
public
public
public
public
public
public
public
EXIT
Figure 5-23 SNMP Traps Screen
Figure
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
RETURN
5-23.
1960_17