Using Bootp - Cabletron Systems 6E122-26 User Manual

Chapter 5: Local Management
TFTP DOWNLOAD. WILL COMMIT TO FLASH. REBOOT IN PROGRESS...
Module Type: 6E122-26
Slot Number: X
EXECUTE
Download Server IP and Download Server Filename are
NOTE
displayed only when TFTP or RUNTIME are selected in
Download Method.
The following briefly explains each field of the Flash Download screen:
Download Method (Selectable)
This field toggles between TFTP, RUNTIME and BOOTP. If set for
BOOTP, the module sends out a BootP request to determine the IP
address of the TFTP server and the filename of the image to be
downloaded. If set for TFTP or RUNTIME, the 6E12X-26 and 6E13X-25
attempts a TFTP download based on the IP address and filename entered
in the fields at the bottom of the Flash Download screen.
describes how to download using TFTP.
download using RUNTIME.

using BootP.

5-80 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
6E122-26 LOCAL MANAGEMENT
Flash Download
Download Method:
Reboot After Download:
TFTP Gateway IP Addr:
Last Image Server IP:
Last Image File Name:
Download Server IP:
Download File Name:
Figure 5-29 Flash Download Screen
Section 5.23.3
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
[TFTP]
[YES]
134.141.79.123
134.141.79.121
RETURN
/tftpboot/6E122.hex
134.141.79.121
/tftpboot/6E122.hex
EXIT
Section 5.23.2
describes how to download
XX.XX.XX
RETURN
1960_49
Section 5.23.1
describes how to