Ethernet Full Duplex Configuration Screen - Cabletron Systems 6E122-26 User Manual

Chapter 5: Local Management
5.19 ETHERNET FULL DUPLEX CONFIGURATION
SCREEN
The Ethernet Full Duplex Configuration screen,
user to set ports 1 through 24 for either Standard Ethernet or Full Duplex
operation and monitor each port to see whether or not it is enabled and
linked to another device.
Access the Ethernet Full Duplex Configuration screen from the Module
Specific Configuration Menu screen by using the arrow keys to highlight
the ETHERNET FULL DUPLEX CONFIGURATION menu item in
the Module Specific Configuration Menu screen and press ENTER. The
Ethernet Full Duplex Configuration screen,
Event Message Line
Module Type: 6E122-26
Slot Number: X
PORT # OPERATION MODE
1 [STANDARD ENET]
2 [STANDARD ENET]
3 [STANDARD ENET]
4 [STANDARD ENET]
5 [STANDARD ENET]
6 [STANDARD ENET]
7 [STANDARD ENET]
8 [STANDARD ENET]
9 [STANDARD ENET]
10 [STANDARD ENET]
11 [STANDARD ENET]
12 [STANDARD ENET]
SAVE SET ALL PORTS: [FULL ]
Figure 5-25 Ethernet Full Duplex Configuration Screen
5-66 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
6E122-26 LOCAL MANAGEMENT
Full Duplex Configuration
LINK STATUS
Link
Link
Link
No Link
Link
Link
Link
Link
Link
Link
Link
Link
[13-24]
Figure 5-25, allows the
Figure 5-25, displays.
Firmware Revision: XX.XX.XX
BOOTPROM Revision: XX.XX.XX
PORT STATUS
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
ENABLED
EXIT
RETURN
RETURN
1960_21