Connecting Utp Cables To Ports 1 Through 24 Of The 6E133-25 And 6E123-26 - Cabletron Systems 6E122-26 User Manual

Chapter 3: Installation
3.5.2 Connecting UTP Cables to Ports 1 Through 24 of
the 6E133-25 and 6E123-26
When facing the front panel of the 6E133-25 or 6E123-26, the upper
RJ21 is the connector for 10BASE-T ports 1 through 12. The lower RJ21
is for 10BASE-T ports 13 through 24. All 24 ports have internal
crossovers.
Connect a twisted pair segment to the 6E133-25 and 6E123-26 as follows:
1. Ensure that the device connected to the other end of the segment is
powered ON.
2. If using an RJ21 straight connector, plug it into the appropriate RJ21
port as shown in
supplied with the device, insert the RJ21 angle adapter as shown in
Figure 3-5. The RJ21 angle adapter allows the cable to be inserted
without interfering with the proper attachment of the second
connector.
.
Screw
Screw
Figure 3-4 6E133-25 and 6E123-26 Twisted Pair Connection
3-8 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
Figure 3-4 or, if using the RJ21 angle adapter
Screw Hole
Screw Hole
9 10
11 12
1
13 14
24
15 16
RX (Receive)
LED
17 18
19 20
21 22
23 24
13
207603