Connecting Utp Cables To Ports 1 Through 24 Of The 6E122-26 And 6E132-25 - Cabletron Systems 6E122-26 User Manual

Chapter 3: Installation
3.5.1 Connecting UTP Cables to Ports 1 Through 24 of
the 6E122-26 and 6E132-25
Ports 1 through 24 of the 6E122-26 and 6E132-25 are 10BASE-T ports
with internal crossovers. When connecting a workstation, use a
straight-through cable. When connecting networking devices, such as
another bridge, repeater, or router, use a crossover cable.
Connect a twisted pair segment to the 6E122-26 and 6E132-25 as follows:
1. Ensure that the device connected to the other end of the segment is
powered ON.
2. Connect the twisted pair segment to the 6E132-25 or 6E122-26 by
inserting the RJ45 connector on the twisted pair segment into the
desired RJ45 port (Ports 1 through 24) as shown in
.
Figure 3-2 6E122-26 and 6E132-25 Twisted Pair Connection
3-6 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
Figure
5 6
7 8
9 10
11 12
13 14
15 16
RX (Receive)
LED
17 18
19 20
21 22
23 24
207603
3-2.