Establishing Community Names - Cabletron Systems 6E122-26 User Manual

The following explains each SNMP Community Names screen field:
Community Name (Modifiable)
Displays the user-defined name through which a user accesses 6C105
management. Any community name assigned here acts as a password to
Local/Remote Management.
Access Policy (Read-Only)
Indicates the access accorded each community name. Possible selections
are as follows:
read-only
read-write
super-user
5.8.1

Establishing Community Names

The password used to access Local Management at the Password screen
must have Super-User access in order to view and edit the SNMP
Community Names screen. Using a password with read-only or
read-write access does not allow the user to view or edit the SNMP
Community Names screen.
Any community name assigned in the SNMP Community
NOTE
Names screen is a password to its corresponding level of
access to Local Management. The community name assigned
Super-User access is the only one that gives the user complete
access to Local Management.
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
SNMP Community Names Screen
This community name allows read-only access
to the 6C105 MIB objects, and excludes access
to security-protected fields of read-write or
super-user authorization.
This community name allows read and write
access to the 6C105 MIB objects, excluding
security protected fields for super-user access
only.
This community name permits read-write
access to the 6C105 MIB objects and allows the
user to change all modifiable parameters
including community names, IP addresses,
traps, and SNMP objects.
5-25