Navigating Local Management Screens - Cabletron Systems 6E122-26 User Manual

Chapter 5: Local Management
The User's password is one of the community names specified
NOTE
in the SNMP Community Names screen. Access to certain
Local Management capabilities depends on the degree of
access accorded that community name. Refer to
• If an invalid password is entered, the terminal beeps and the cursor
returns to the beginning of the password entry field.
• Entering a valid password causes the associated access level to display
at the bottom of the screen and the Main Menu screen to appear.
• If no activity occurs for several minutes, the Password screen
reappears and the session ends.
5.4.1

Navigating Local Management Screens

The 6E12X-26 and 6E13X-25 Local Management application consists of
a series of menu screens. Navigate through Local Management by
selecting items from the menu screens.
The 6E12X-26 and 6E13X-25 support three modes of switch operation.
The switching modes are as follows:
• 802.1D SWITCHING, (traditional switching)
• 802.1Q SWITCHING, (802.1Q port based VLANs)
• SECURE FAST VLAN, (Cabletron Systems SecureFast Switching)
Refer to the Release Notes shipped with the product to verify
NOTE
which screens are supported in each of the three available
switching modes.
The switch operational mode may be set in either the Chassis
Configuration screen
of the module (Section
the module, the hierarchy of Local Management screens differs as shown
in Figure 5-4, Figure
that relates to the Operational Mode that will be set for the module to see
the applicable Local Management screen hierarchy.
5-8 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
(Section 5.7), or the General Configuration screen
5.15). Depending on the Operational Mode set for
5-7, and Figure 5-8. Refer to the appropriate figure
Section 5.8.