Clearing Nvram - Cabletron Systems 6E122-26 User Manual

Chapter 5: Local Management

5.15.13 Clearing NVRAM

Clearing NVRAM will result in the loss of all user-entered
!
parameters. Do not proceed unless this procedure is
completely understood.
CAUTION
Clearing NVRAM allows the user to clear all user-entered parameters,
such as IP address and Community Names from NVRAM.
Clear NVRAM as follows:
1. Use the arrow keys to highlight the Clear NVRAM field.
2. Use the SPACE bar to toggle the field to YES.
3. Use the arrow keys to highlight SAVE at the bottom of the screen.
4. Press ENTER. The warning shown in
YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEAR
ALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TO
IP ADDRESS, INTERFACE CONFIGURATION, AND COM PORT
CONFIGURATION, THEN RESET THE BOARD.
ARE YOU SURE YOU WANT TO CLEAR NVRAM?
5. Use the arrow keys to highlight YES and press ENTER. The message
"CLEARING NVRAM. REBOOT IN PROGRESS..." displays.
The 6E12X-26 and 6E13X-25 clear NVRAM and reboot. All user-entered
parameters default to factory settings.
5-56 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
YES
Figure 5-21 Clear NVRAM Warning Screen
Figure 5-21
WARNING
is displayed.
NO
174251