Fe-100Tx Led - Cabletron Systems 6E122-26 User Manual

Chapter 4: Troubleshooting
LED Color
Off
TX
Green
Amber
Red
4.2

FE-100TX LED

The optional FE-100TX has one LED labeled 10/100. The 10/100 LED
together with the receive LED allows the user to determine the link status
and the operating speed of the Fast Ethernet Interface Module. The
10/100 LED and the Receive (RX) LED are shown in
Table 4-2 and Table 4-3
LED when the RX LED is on or off, respectively.
4-4 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
Table 4-1 LANVIEW LEDs (Continued)
State
Port enabled, and no
activity.
Flashing. Indicates
activity. Rate indicates
data rate.
Blinking. Port in
standby, link.
Flashing. Indicates
collision rate.
Solid. Diagnostic
Failure.
provide a functional description of the FE-100TX
Recommended Action
Should flash green every 2
seconds indicating BPDUs
being sent if STA is enabled
and there is a valid link. If STA
is enabled, and the LED does
not flash green, contact the
Cabletron Systems GCC.
No action.
Port may be disabled due to
Spanning Tree.
No action.
Contact the Cabletron
Systems GCC for assistance.
Figure 4-2.