Using The Clear Counters Command; Rmon Statistics Screen - Cabletron Systems 6E122-26 User Manual

5.28.2 Using the Clear Counters Command

To reset all the statistics counters of the selected interface to zero, perform
the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command.
2. Press ENTER, the counters for the selected interface are reset to zero.
5.29

RMON STATISTICS SCREEN

RMON statistics for each interface, on a interface-by-interface basis, are
viewed through the RMON Statistics screen shown in
Access the RMON Statistics screen by using the arrow keys to highlight
the RMON STATISTICS menu item on the Module Statistics Menu
screen and pressing ENTER. The RMON Statistics screen displays.
Event Message Line
Module Type: 6E122-26
Slot Number: X
RMON Index:
Data Source:
Drop Events:
Collisions:
Broadcast Pkts:
Multicasts:
CRC Align Errors:
Undersized Pkts:
Oversized Pkts:
Fragments:
Jabbers:
Index: [XX]
The RMON Statistics screen provides statistics for all front
NOTE
panel Ethernet interfaces, and any Fast Ethernet Interface
Modules installed in the 6E12X-26. RMON Statistics are not
gathered for an HSIM installed in the 6E13X-25.
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
6E122-26 LOCAL MANAGEMENT
RMON Statistics
X
IfIndex.1
0
0
0
0
0
0
0
0
0
CLEAR COUNTERS
Figure 5-35 RMON Statistics Screen
RMON Statistics Screen
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Owner: monitor
Status: valid
Total Packets:
Total Octets:
64 Octets:
65 - 127 Octets:
128 - 255 Octets:
256 - 511 Octets:
512 - 1023 Octets:
1024 - 1518 Octets:
EXIT
Figure 5-35.
XX.XX.XX
0
0
0
0
0
0
0
0
RETURN
2269_65
5-99