6E12X-26 And 6E13X-25 Overview - Cabletron Systems 6E122-26 User Manual

Chapter 1: Introduction
Chapter 5, Local
Management and use the Local Management screens to manage the
6E12X-26 and 6E13X-25 interface modules and the 6C105 chassis.
Appendix A, Specifications, contains information on functionality and
operating specifications, connector pinouts, environmental requirements,
and physical properties.
Appendix B, FE-100TX, FE-100FX and FE-100F3
contains information about FE-100TX pinouts and information
concerning cable types used with the FE-100FX and FE100-F3.
Appendix C, Mode Switch Bank Settings and Optional
describes how to install optional Fast Ethernet Interface Modules and how
to set the Mode Switches.
1.3

6E12X-26 AND 6E13X-25 OVERVIEW

The 6E12X-26 and 6E13X-25, shown in
modules for Cabletron Systems 6C105 SmartSwitch 6000 chassis.
The 6E12X-26 and 6E13X-25 are high-speed network switch devices that
support 802.1D switching (bridging), 802.1Q switching, and Cabletron
Systems SecureFast Switching Virtual Network technology. Ports 25 and
26 of the 6E12X-26 support optional Fast Ethernet Interface Modules and
can provide uplinks to 100BASE-TX or 100BASE-FX Fast Ethernet
networks. The 6E13X-25 is capable of being equipped with a High Speed
Interface Module (HSIM) that provides for additional connectivity to
other high speed networking technologies such as Asychronous Transfer
Mode (ATM), Wide Area Networks (WANs) and Fiber Distributed Data
Interface (FDDI).
The 6E12X-26 and 6E13X-25 can be used to connect individual
high-bandwidth user devices, such as workstations, and to provide a
central switching point for multiple Ethernet segments using devices such
as Cabletron Systems HubSTACK or other third party stackable devices.
Figure 1-1
NOTE
6E122-26 and the 6E123-26 are functionally identical, as are
the 6E132-25 and the 6E133-25. The only difference being that
the 6E123-26 and 6E133-25 modules support RJ21 front panel
connections.
1-2 6E122-26, 6E132-25, 6E123-26 and 6E133-25 User's Guide
Management, describes how to access Local
displays the 6E122-26 and 6E132-25. The
Specifications,
Figure 1-1, are interface
Installations,