Table of Contents
Advertisement
Installing an HP BLc Intel
BladeSystem Enclosure
To install an HP BLc Intel
these steps:
1.
Slide the HP BLc Intel
enclosure (see callout 1 in
Figure 6
Installing an HP BLc Intel
Enclosure
2.
Push the blade handle in until it is in the locked position (see callout 2 in
locked when you cannot pull it back out without pushing the blade handle
Installing InfiniBand Cables in an HP BLc Intel
Managed Switch
Figure 7
shows and
4X QDR InfiniBand Managed Switch. QSFP connector to QSFP connector InfiniBand QDR/QDR cables
are used to connect multiple HP BLc Intel
information about supported Infiniband cables, see the HP InfiniBand Options for HP ProLiant and
Integrity Servers Quickspec on the HP website:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.HTML
10
Hardware Installation
®
4X QDR InfiniBand Managed Switch into an HP
®
4X QDR InfiniBand Managed Switch into an HP BladeSystem enclosure, follow
®
4X QDR InfiniBand Managed Switch all the way into the HP BladeSystem
Figure
6).
®
4X QDR InfiniBand Managed Switch into an HP BladeSystem
Table 3
defines an InfiniBand cable with a QSFP connector used with an HP BLc Intel
®
4X QDR InfiniBand Managed Switches together. For more
Figure
6). The blade handle is
release.
®
4X QDR InfiniBand
®
Advertisement
Table of Contents
Need help?
Do you have a question about the BLc Intel 4X QDR InfiniBand and is the answer not in the manual?
Questions and answers