Command Id - Thies CLIMA First Class Advanced X Instructions For Use Manual

11.2.9 Command ID

<id>ID<parameter><CR>
Access:
Description:
Parameter type:
Parameter:
Type return value:
Return value:
Value range:
Initial value:
© Adolf Thies GmbH & Co. KG · Hauptstraße 76 · 37083 Göttingen · Germany
Phone +49 551 79001-0 · Fax +49 551 79001-65 · info@thiesclima.com · www.thiesclima.com
Identification number.
reading / writing
This command sets the identification number (THIES inter-
preter) or the slave address (MODBUS RTU interpreter). Only if
the id included in the command corresponds to the one set in
the wind transmitter, a response telegram is sent. One excep-
tion is the generic 'id' where all wind transmitters respond
(THIES interpreter). After changing the 'id', the device responds
immediately with the new 'id'.
unsigned integer
99 generic 'id' (THIES interpreter)
0 Broadcast slave address (MODBUS RTU interpreter)
unsigned integer
see parameter
0 to 99 (THIES interpreter)
1 to 247 (MODBUS RTU Interpreter)
0 (THIES interpreter) for sensor 4.3352x0.400
1 (MODBUS RTU Interpreter) for sensor 4.3352.x.0.401
021814/03/21
Page 40 of 86