Proceq ZAA 2600.SW Instruction Manual page 46

•
Mount the height adjustment (5) with the tool holder (4) on the left side of the
device, the height adjustment (5) without the tool holder on the right side.
•
Fold up the tool holder (4) and place the sample tray (3) in the unit. The drain
lead-out has to be at the back part of the unit.
•
Fix the lead-out (16) at the drain union.
The drain hose (16) has to drain the liquid outwards. The hose must not point
into the unit. When using the device with liquids the drain hose (16) must be
mounted.
(4)
Page 46