Table of Contents
Advertisement
For tests on hard surfaces (e.g. painted steel plate), it is recommended to
mount the supplied foam cushion between the hard rubber cushion and the
abrasive. As a result, the abrasive is better adapted to the substrate.
Vibrations may occur during tests on rubber-like surfaces (e.g. soft-touch
painting). In such cases it is recommended to remove all rubber elements
(foam cushion, hard rubber cushion as well as the adhesive film).
6.2 Carry out a scrub test
The side panels (17) must always be mounted during operation.
Never touch any moving parts during operation.
Mounting for hard surfaces
Mounting for rubber-like surfaces
Page 23
Advertisement
Table of Contents
