Proceq ZAA 2600.SW Instruction Manual page 47

•
Place the sample frames (6) in the unit and while pressing them down fix the
screws with a quarter-turn.
•
Fold down the tool holder (4).
•
Remount the side panels (17), the one with slit on the right side, the other one
on the left side.
•
Remount the previously removed screws of the start stop (1) and end stop (2).
•
Move the start stop (1) backwards and the end stop (2) forward as far as
possible. Fasten their screws.
(6)
(4)
(2)
Page 47
(1)