Proceq ZAA 2600.SW Instruction Manual page 24

Automatic scrub tester
Table of Contents

Advertisement

Depending on the abrasives used, the test may only be carried out in a
ventilated environment.
Place the device on a solid, even surface.
Level the apparatus using the included spirit level. To do so, place the spirit
level on the sample tray and adjust the levelling feet (9) until the Proceq ZAA
2600 is levelled perfectly. The sample tray must be firmly in place.
Fold up the tool holder (4).
Open the screws of the sample frames (6) with a quarter-turn and remove the
sample frames (6).
Place the sample.
Replace the sample frames (6) in the unit and while pressing them down
fasten the screws with a quarter-turn.
Fold down the tool holder (4).
When testing flat samples mount the clips (8). They ensure stable running of
the friction sets.
Page 24

Advertisement

Table of Contents
loading

Table of Contents