Table of Contents
Advertisement
11 Maintenance and cleaning
11.1 Maintenance and cleaning work that can be carried out by the user
Only the following maintenance and cleaning work shall be carried out by the user:
•
Outer cleaning of the apparatus (see chapter 11.2 on page 48)
•
Periodical lubrication of the guide shafts (see chapter 11.3 on page 48)
•
Replacing of the fuse (see chapter 11.4 on page 50)
•
Inspection (see chapter 11.5 on page 50)
All other maintenance and repair work shall only be carried out by Proceq SA
or your authorized Proceq agent otherwise all guarantee and liability claims
are void.
11.2 Cleaning
In order to ensure a perfect function, the Proceq ZAA 2600 should be kept as clean
as possible. Remove eventual stains of friction medium, coating materials or
adhesives immediately before they can dry. Later they can often only be removed
with difficulty.
For cleaning of the apparatus use commercially available cleaning agents such as
cleaning agent for glass, benzine, acetone. Do not use strong acids or alkaline
liquids!
For cleaning of the printing blanket use only cleaning agents which do not affect
the printing blanket. Unsuitable for this purpose are solvents containing ketone such
as acetone, or nitro-cellulose diluents.
Before cleaning the Proceq ZAA 2600, always switch off the apparatus and
pull out the power plug. Never immerse the apparatus in water or other liquids:
Danger of short circuit.
While cleaning, take care that no cleaning liquid penetrates the interior of the
apparatus. The function of electrical or mechanical components could be
impaired.
If the device has to be disinfected, do not use disinfectants that contain
sodium hydroxide.
11.3 Lubrication of the guide rods
From time to time it can be necessary to lubricate the guide rods with some sewing
machine oil or something similar.
Before lubricating the guide rods of the Proceq ZAA 2600, always switch off
the apparatus and unplug it.
Page 48
Advertisement
Table of Contents
