Table of Contents
Advertisement
7.1.6 Setting the cycle speed
The double stroke speed can be set by tapping the Speed field. A slider will appear
on the right side of the touch screen to change the value. The value can also be
changed by using the
The preset double stroke speed will automatically be saved in the currently selected
layout.
7.1.7 Setting the stroke length
The stroke length can be set by tapping the Length field. A slider will appear on the
right side of the touch screen to change the value. The value can also be changed
by using the
and
The preset stroke length will automatically be saved in the currently selected layout.
7.1.8 Position
The position field shows the current position of the tool holder (4) relative to the
previously defined zero position.
7.1.9 Menu
The menu can be opened using the „Menu"
changed from here.
„Setup"and „Machine Mode", then tap „Scrubbing".
and
button.
button.
Page 29
button. Various settings can be
If the device is equipped with the
appropriate modification set, also other
tests like crocking, scratching or
applications can be carried out with the
Proceq ZAA 2600 universal unit.
These functions are always integrated
in the menu, however they are not
working without the modification sets.
If you see this screen, the device is in
application mode. Go back to the
scrubbing mode as follows:
Open the menu
, select
Advertisement
Table of Contents
