Use Of The Friction Sets - Proceq ZAA 2600.SW Instruction Manual

The weight of the friction sets will only be reached if the knurled nut is
mounted.
To avoid ejection of weights they have to be screwed to the holder.

6.1.2 Use of the friction sets:

Use of the friction sets for ISO 11998:
•
Press the abrasive pad firmly onto the Velcro
surface of the holder.
No additional weight is needed for tests according
to ISO 11998.
Spare abrasive pads
Spare Velcro
Use of the friction sets for ASTM D4213:
•
Slide on the weight for ASTM D4213 and screw it
in place.
•
Use a sponge of 95 x 38 x 28 mm (3.74 x 1.5 x
1.1").
•
Insert the sponge into the holder with the largest
surfaces facing up and down.
•
Place the abrasive pad on the sponge. (The pad
will only be placed.)
Spare sponge
Spare abrasive pad
Page 20