Pulscon LTC
Function "safety settings" (01)
–
+
E
–
+
E
–
+
E
–
+
E
28
4.8
Function "ackn. alarm" (017)
This function acknowledges an alarm in case of "self holding".
Selection:
•
no
•
yes
no
The alarm is not acknowledged.
yes
Acknowledgement takes place.
4.9
Function "overspill prot." (018)
When "german WHG" is selected, various parameters relating to WHG overflow
protection are defaulted and the instrument is locked against further operation. Select
"Standard" to unlock, the WHG parameter settings are retained.
4.10
Function "broken probe det" (019)
This function activates the automatic recognition of broken probes.
Before updating the broken probe detection a mapping must be performed (function
"range of mapping" (052) and "start mapping" (053), see page 20).
Selection:
•
off
•
on
After 3 s, the following message appears