Function "Output On Alarm" (011), Hart Only; Function "Outp. Echo Loss" (012); Output On Alarm (Hart Only); Outp. Echo Loss - Pepperl+Fuchs Pulscon LTC Description Of Instrument Functions

Pulscon LTC
Function "safety settings" (01)

– +
E
"

– +
E
24
4.2

Function "output on alarm" (011), HART only


On alarm, the output current is in mA. This function is active when you selected
"user specific" in the "output on alarm" (010) function.
Caution!
This selection is available for HART devices only!
4.3

Function "outp. echo loss" (012)

Use this function to set the output response on echo loss.
Selection:
• hold
• ramp %/min
• alarm
alarm
On echo loss, the instrument switches to alarm state after an adjustable
"delay time" (014). The output response depends on the configuration set in
"output on alarm" (010).