Output On Alarm - Pepperl+Fuchs Pulscon LTC Description Of Instrument Functions

Pulscon LTC
Function "safety settings" (01)
Hold
[mA]
22
If the instrument is in alarm state, the last measured value is held.
user specific
If the instrument is in alarm state, the output is set to the value configured in
"output on alarm" (011) (x mA).
Caution!
"
This selection is available for HART devices only!
HART
(110 %)
hold
(-10 %)
3.6
PA
110 %
-10 %
t
hold
t
23