Table of Contents
Advertisement
Pulscon LTC
Function group "linearisation" (04)
–
+
E
!
!
34
Note!
After making entries into the table, activate it with "table on". The 100 % value
(= 20 mA for HART) is defined by the last point in the table.
Note!
Before confirming 0.00 m as the level or 0.00 % as the volume, activate the edit mode
O
S
with
or
.
Entries can be made into the linearisation table in PACTware
can also display the contents graphically.
Select the table point (Point 3).
Enter the level belonging to Point 3.
Enter the corresponding volume.
Enter a further table point?
Next table point.
TM
using the table editor. You
Advertisement
Table of Contents
