Table of Contents
Advertisement
Pulscon LTC
Notes on use
6
1.4
General structure of the operating menu
The operating menu is made up of two levels:
•
Function groups (00, 01, ... , 0C, 0D):
The individual operating Selection of the instrument are split up roughly into different
function groups. The function groups that are available include, e. g.:
"basic setup", "safety settings", "output", "display", etc.
•
Functions (001, 002, 003, ..., 0D8, 0D9):
Each function group consists of one or more functions. The functions perform the
actual operation or parameterisation of the instrument. Numerical values can be
entered here and parameters can be selected and saved. The available functions
of the "basic setup" (00) function group include, e. g.: "tank shape" (002),
"medium property" (003), "process cond." (004), "empty calibr." (005), etc.
If, for example, the application of the instrument is to be changed, carry out the following
procedure:
•
Select the "basic setup" (00) function group.
•
Select the "tank properties" (002) (where the existing tank properties is selected).
1.4.1
Identifying the functions
For simple orientation within the function menus, for each function a position is shown
on the display.
The first two digits identify the function group:
•
basic setup
•
safety settings
•
linearisation
...
The third digit numbers the individual functions within the function group:
•
basic setup
00
Here after the position is always given in brackets (e. g. "tank properties" (002)) after
the described function.
00
01
04
→
•
tank properties.
•
medium property
•
process cond.
...
002
003
004
Advertisement
Table of Contents
