Pulscon LTC
Function group "extended calibr." (05)
7.4
–
+
E
This function is used to start the interference echo mapping up to the distance given in
"range of mapping" (052).
Selection:
•
off: no mapping is carried out
•
on: mapping is started
7.5
–
+
E
Displays the distance up to which a mapping has been recorded. A value of 0 indicates
that no mapping was recorded so far.
7.6
–
+
E
This function allows cancellation of the available mapping.
Selection:
•
no
•
yes
no
The available mapping is not cancelled and remains active.
yes
After mapping is cancelled, the device skips to the "dist./meas.value" (008) display.
Function "start mapping" (053)
Function "pres. map dist." (054)
pres. map dist. (054)
Function "delete mapping" (055)
41