Table of Contents
Advertisement
Pulscon LTC
Notes on use
–
+
E
10
1.6
Commissioning
1.6.1
Switching on the measuring device
When the instrument is switched on for the first time, the following messages appear on
the display:
After 5 s, the following message appears
After 5 s, the following message appears
(e. g. on HART devices)
After 5 s or after you have pressed
following message appears
Select the language
(this message appears the first time the instrument
is switched on)
Select the basic unit
(this message appears the first time the instrument
is switched on)
The current message value is displayed
F
After
is pressed, you reach the group selection
This selection enables you to perform the basic
setup
F
the
Advertisement
Table of Contents
