Pepperl+Fuchs Pulscon LTC Description Of Instrument Functions page 9

Pulscon LTC
Notes on use
1.5.4
– +
E
F
X
basic setup
O
safety settings
linearisation
extended calibr.
...
S
...
1.
2.
3.
4.
5.
6.
Operation with the LTC-Z02
X
X
2 x
F
tank shape
O
Standard
aluminium tank
plastic tank
bypass / pipe
S
coax probe
concrete wall
Change from measured value display to Group selection by pressing F.
Press S or O to select the required Function group (e. g. "basic setup" (00)) and
confirm by pressing F → first function (e. g. "tank shape" (002)) is selected.
The active selection is marked by a  in front of the menu text.
Activate Edit mode with O or S .
Selection menus
a) Select the required Parameter in selected function (e. g. "tank shape" (002))
with S or O .
b) F confirms selection; →  appears in front of the selected parameter.
c) F confirms the edited value; → system quits edit mode.
d) O and S (= Q) interrupts selection; → system quits edit mode.
Typing in numerals and text
a) Press O or S to edit the first character of the numeral/text (e. g. "empty
calibr." (005)).
b) F positions the cursor at the next character; → continue with a. until you have
completed your input.
c) If a ↵ symbol appears at the cursor, press F to accept the value entered;
→ system quits edit mode.
d) O and S (= Q) interrupts the input; → system quits edit mode.
Press F to select the next function (e. g. "medium property" (003)).
Press O and S (= Q) once; → return to previous function (e. g. "tank
shape" (002)).
Press O and S (= Q) twice; → return to Group selection.
Press O and S (= Q) to return to Measured value display.
X
F
medium property
O
S
> 3 s
...
Return to
Group Selection
9