Function Group "Envelope Curve" (0E); Function "Plot Settings" (0E1); Function "Recording Curve" (0E2) - Pepperl+Fuchs Pulscon LTC Description Of Instrument Functions

Pulscon LTC

Function group "envelope curve" (0E)


– +
E

– +
E

– +
E
!
52
9 Function group "envelope curve" (0E)
9.1

Function "plot settings" (0E1)

Here you can select which information is shown on the display:
• envelope curve
• subtracted signal
• mapping
9.2

Function "recording curve" (0E2)

This function determines whether the envelope curve is read as
• single curve or
• cyclic
Note!
If the cyclical envelope curve is active in the display, the measured variable is refreshed
in a slower cycle time. It is therefore recommended to exit the envelope curve display
after optimising the measuring point.