Pulscon LTC
Function group "output" (06), - "profibus param." (06), PROFIBUS PA only
–
+
E
–
+
E
–
+
E
–
+
E
"
–
+
E
"
–
+
E
"
50
8.12
Function "simulation value" (066)
8.13
Function "output current" (067), HART only
Displays the output current in mA.
Caution!
This function is available for HART devices only!
8.14
Function "2nd cyclic value" (067), PROFIBUS PA only
Selects the second cyclical value.
•
height/dist.
Pulscon LTC always transmits the distance as the second cyclical value.
Caution!
This function is available for PROFIBUS PA devices only!
8.15
Function "4mA value" (068), HART only
In this function, enter the level (or volume, weight) at which the output current should be
4 mA. This entry is only required if you selected the "current turn down" option in the
"curr. output mode" (063) function.
Caution!
This function is available for HART devices only!
After selecting the "sim. level" option in the
"simulation" (065) function, the following
message appears in the display: you can enter
the level.
After selecting the "sim. volume" option in the
"simulation" (065) function, the following
message appears in the display: you can enter
the volume.
After selecting the "sim. current" option in the
"simulation" (065) function, the following
message appears in the display: Enter the
output current (only for HART instruments).