Special Tools; General Information - Kodak Multiloader 700 Side-by-Side Kit Installation Instructions Manual

SHRINKING TUBE 40mm diameter ............................................................4.2m
SIDE PANELS .................................................................................................2
SIDE-BY-SIDE KIT .........................................................................................1
SUPPORT LEG ...............................................................................................3
WALL ANCHOR ..............................................................................................2
WIRE TIE .........................................................................................................2
OPERATING INSTRUCTIONS .....................................................................1
PROCESSOR ADAPTER
ADAPTER COVER .........................................................................................1
ADAPTER FRAME WITH CONVEYER .......................................................1
FILM GUIDE ....................................................................................................1
NUT M5 ............................................................................................................2
SBS MOUNTING BOLT .................................................................................2
SCREW ALLEN HEAD M4x16 .....................................................................2
SCREW M5x50 ...............................................................................................2
WASHER ..........................................................................................................2
SCREW 8-32 x 3/8 inch ................................................................................5
DFT
COUNTERSUNK SCREW M4x20 ................................................................4
FEED TRAY COVER .....................................................................................1
FEED TRAY with REED RELAY..................................................................1
LED BOX..........................................................................................................1
MOUNTING BRACKET ..................................................................................2
SCREW M4x10 ...............................................................................................4
SCREW M5x12 ...............................................................................................2
WASHER M4 ...................................................................................................4
WASHER M5 ...................................................................................................2
BRIGHTNESS CONTROL PCB ....................................................................1

SPECIAL TOOLS

PERMANENT MAGNET (2x) ........................................................................PN 544240

GENERAL INFORMATION

The SIDE-BY-Side Kit (hereafter called SBS in this publication) is already set-up for
customer needs. This means the SBS is set up in the correct orientation (ML700 left or right
of the PROCESSOR) and for the selected PROCESSOR. This set up is done in the factory.
However this set-up can be changed in the field if necessary. This change is described in the
last chapter of this publication. If an existing ML700 is upgraded with an SBS, ensure that
the ML700 has an OPERATING SOFTWARE Version => 4.0.
KODAK AG, Stuttgart 1-5
II 3066-2
10/98