Table of Contents
Advertisement
II 3066-2
3
.
Mount the ADAPTER FRAME to the rear of the PROCESSOR. Use the existing 2
bottom screws only. These SCREWS are packed with the PROCESSOR INSTALLATION
KIT.
The PROCESSOR SCREWS are imperial, the SBS and ML700 SCREWS are metric.
4
.
Mount the UPPER EXIT GUIDE and fix it with 3 SCREWS (imperial). These SCREWS
are packed with the PROCESSOR INSTALLATION KIT. If necessary add WASHERS
from the PROCESSOR INSTALLATION KIT.
UPPER EXIT GUIDE
V-shaped GUIDE
10/98
NOTE
MOUNTING SCREW
figure 13-3
figure 13-4
13-2
MOUNTING SCREW (3)
LOWER EXIT
GUIDE
KODAK AG, Stuttgart
Advertisement
Table of Contents
