Kodak Multiloader 700 Side-by-Side Kit Installation Instructions Manual page 30

II 3066-2
2
. Connect the new ADAPTER CABLE (CABLE TUNNEL SENSOR short) to the
CONNECTOR.
3
. Fix the CONNECTOR and HARNESS with WIRE TIES so that they cannot be
caught by moving parts.
4
. Route the new ADAPTER CABLE out of the ML700.
10/98
figure 6-2
new ADAPTER CABLE (CABLE TUN-
NEL SENSOR short)
figure 6-3
6-2
new ADAPTER CABLE (CABLE
TUNNEL SENSOR short)
KODAK AG, Stuttgart