Table of Contents
Advertisement
II 3066-2
REPOSITION THE SERVICE BUTTON
The SERVICE BUTTON should always be on the PROCESSOR side of the SBS. If the
system is not installed against a wall left or right, it is not necessary to reposition the
SERVICE BUTTON, because there is access on either side.
REPOSITION THE DFT COVER PLATES.
To mount the DFT to the opposite side, mount the left-hand COVER PLATE in the position of
the right-hand COVER PLATE and mount the right-hand COVER PLATE in the position of the
left-hand COVER PLATE.
MOUNTING HOLES for the
COVER PLATE
10/98
ADAPTER
PROCESSOR
figure 12-3
left-hand COVER PLATE
figure 12-4
12-4
SERVICE BUTTON
MOUNTING HOLES for the SBS
SUPPORT BRACKETS
MOUNTING HOLES for the DFT COVER
right-hand COVER PLATE
The black
BORE HOLES
are threaded
holes in the
SBS frame.
They are not in
the COVER
PLATE.
KODAK AG, Stuttgart
Advertisement
Table of Contents
