Table of Contents
Advertisement
II 3066-2
7
.
Adjust the 2 FILM GUIDES up or down, so that a FILM from the ML700 CONVEYER
is not obstructed.
8
.
To avoid flooding of the ML700 install the Y-ADAPTER 9170871 to the HUMIDIFIER
DRAIN. Flooding can be caused by long or kinked DRAIN HOSES. The HUMIDIFIER
DRAIN HOSE should always be connected to an open DRAIN. Otherwise the drain of
an other UNIT (for example of the processor) may back up and causes flooding of the
ML700.
NOTE
Extend WATER and
DRAIN HOSE with
extentions and
clamps provided
with the INSTALLA-
TION KIT. This al-
lows the ML700 to
be pulled forward
without damaging
the hoses. Do not
kink the DRAIN
HOSE!
10/98
figure 6-6
figure 6-7
6-4
FILM GUIDES
HOSE 9198401
Y-ADAPTER 9170871
DRAIN must be open
KODAK AG, Stuttgart
Advertisement
Table of Contents
