Table of Contents
Advertisement
II 3066-2
27.
Drill 5 holes into the TOP PANEL for the SCREWS (see FIGURE 14-8).
This also marks the position of the ANCHORS.
28.
Remove the TOP PANEL (see FIGURE 14-8).
29
. Drill holes for the ANCHORS into the wall at the marked positions, and insert the
ANCHORS.
TOP SERVICE DOOR
5 SCREWS
TOPPANEL
BRACKET B
30
. Apply SILICONE along the WALL OPENING.
31
. Insert TOP PANEL into BRACKET B.
32
. Press TOP PANEL against the wall.
33
. Screw the TOP PANEL to the wall.
34
. Insert TOP SERVICE DOOR and close it.
35.
Close the PLASTIC COVER.
10/98
figure 14-8
14-10
PLASTICCOVER
ON THIS SIDE
WALL
SILICONE
KODAK AG, Stuttgart
Advertisement
Table of Contents
