Table of Contents
Advertisement
5
.
Mount the FILM GUIDE and fix it with 3 SCREWS (UNC). These SCREWS are
packed with the PROCESSOR INSTALLATION KIT. If necessary add WASHERS from
the PROCESSOR INSTALLATION KIT.
6
.
Insert the CONVEYER into the ADAPTER. There are V-shaped guides on either side
of the ADAPTER FRAME. They guide the CONVEYER into the correct position.
KODAK AG, Stuttgart
MOUNTING SCREW
figure 3-5
V-shaped GUIDE
figure 3-6
3-3
II 3066-2
FILM GUIDE
10/98
Advertisement
Table of Contents
