Table of Contents
Advertisement
49
. Add the WASHER from the INSTALLATION KIT under the MOUNTING BOLT for the
KODAK Multiloader 700 Plus adapterplate and under the MOUNTING BOLT for the
PROCESSOR ADAPTER).
50
. Install the PROCESSOR according to the INSTALLATION GUIDE SBS.
51.
Install the KODAK Multiloader 700 Plus to the SBS according the INSTALLATION
GUIDE SBS.
52
. Insert BACK SERVICE DOOR.
TEST:
1
.
From the darkroom check for light-tightness.
2
.
If there is any light, use black SILICONE to close the gaps.
KODAK AG, Stuttgart
Insert WASHER
figure 14-11
14-13
II 3066-2
10/98
Advertisement
Table of Contents
