Service Procedures; Service Tools - Kodak CR 360 Service Manual

Service Guide
Section 3: Service Procedures

Service Tools

The following is a list of tools required for service operations:
• Phillips (cross-head) screwdriver (medium)
• Flat screwdriver
• Allen wrenches (metric): 0.89, 1.5, 2, 2.5, 3, 3.5, 4, 5
• Open-ended wrenches (metric): 5.5, 7
• Wire cutters
• Long-nose pliers
• Multi-meter / avo (DVM)
• Safety activation key (SK000100)
• Scanning head alignment gauge (SK000099)
• Trolley roller gauge (0.3 mm and 0.4 mm) (SK000024)
• Safety eyewear (The required laser safety eyewear must be intended for HeliumNeon/PDT lasers, have an
optical density of 4-5 wavelengths of 610-695 nm, and be marked as having CE approval.)
24 6H4869