Intelligent Power Software; Signal Input Monitoring; General Purpose Relay Contact - Eaton 93PM G2 Series User And Installation Manual

Eaton 93PM G2 UPS 50 – 360 kVA
6.1.2
Intelligent Power Software are productivity tools for UPS power management.
These software solutions enhance the protection provided by a UPS by shutting
down applications and operating systems, triggering disaster recovery
procedures and migrating virtual machines in case of an extended power outage.
They also help in reducing downtime and increasing the reliability of the UPS by
alarming the operators of issues and monitoring vital meters. The software can
also be used to view the usage characteristics of power equipment across the
enterprise and use the data to optimize the use of the facilities.
Intelligent Power Software is web-based, which means that the information can
be accessed through any device that has a web browser.
On one hand, Intelligent Power Manager (IPM) is a monitoring system that can
concentrate the data and alarms of hundreds of UPS, ePDU and other devices
into a single view. On the other hand, it provides a link to virtualization through
management systems, such as VMware vCenter. This way an administrator gets
a single pane of glass to manage both IT equipment and the supporting
infrastructure. IPM provides the shutdown, migration, disaster recovery and load
shedding features in virtualized environments.
Intelligent Power Protector (IPP) is a shutdown agent with basic monitoring and
alarming capability. It provides automatic, graceful shutdown of computers and
virtual machines or servers powered by an Eaton UPS during a power outage
that lasts longer than your available battery runtime. Intelligent Power Protector
can be remotely supervised and managed by the Intelligent Power Manager
(IPM) application.
Intelligent Power Software is delivered on a CD with the UPS. Alternatively, you
can download it from the Eaton web page. Some of the advanced features of IPM
require a license, contact your Eaton representative for details.
6.1.3
This standard feature lets you connect smoke detectors or over-temperature
alarms to your signal inputs. The user interface terminals for external connections
are located inside the UPS. Use twisted-pair wires for each alarm input and
common.
The signal inputs can be programmed to display the alarm functional name. See
list of Signal input functions in Appendix A Relay alarms .
6.1.4
One general purpose relay contact is provided as a standard feature on the UPS.
An alarm contact is also provided.
© Eaton Corporation plc 2020. All rights reserved.

Intelligent Power Software

Signal input monitoring

General purpose relay contact

Revision: 001 Document ID: P-164000956
User's and Installation Guide
83 (141)