EDAN Acclarix AX4 User Manual page 58

Acclarix AX4 Diagnostic Ultrasound System User Manual
VOI
Cut
Cut tools
Undo
Redo
Undo All
Threshold
Brightness
Contrast
3D
Smooth/MPR
Smooth
Press to activate the function of adjusting VOI or clip
plane. Use the trackpad to adjust and press Set to switch
between VOI and clip plane.
This is a folder of cut functions with various cut tools
inside. See below for details.
These are two radio buttons. The region inside or outside
the trace will be cut. To draw the trace, move the trackpad
and press Set to locate the start point, use trackpad to
draw trace and second press Set to locate the end point.
These are two radio buttons. The region inside or outside
the box will be cut. To draw the box, move the trackpad
and press Set to locate the top left point, move the
trackpad and a box is displayed. Press Set to locate the
lower right point of the box.
These two radio buttons switch the size of the eraser. To
use eraser to cut, move the trackpad and press Set to
locate the first point, move the trackpad and the path that
the eraser moves is cut, and then press Set to complete
the cut.
Undo the previous cut operation
Redo the previous undo operation
Return to the condition before cutting
Adjust the threshold of surface render mode, Upward
presses increase threshold. Downward presses decrease
threshold.
Adjust the brightness of 3D image.
Adjust the contrast of 3D image.
Adjust smoothness of A\B\C slices and 3D images.
Higher filter levels create a smoother image. Upward
presses increase the filter. Downward presses decrease
the filter.
- 51 -
Imaging