EDAN Acclarix AX4 User Manual page 26

Acclarix AX4 Diagnostic Ultrasound System User Manual
Note:
1. When both Admin1 and Admin2 password are forgotten, please contact the
serviceman for the system password reset.
2. It is not suggested to use Emergency login under non-Emergency situation.
Please login the system with your account or switch to your account through the
Switch User function (See "To Switch Users" below) prior to imaging scanning.
3. Ensure the privacy of patient information and data created through Emergency
login. It is suggested to remove the patient exam data from the ultrasound system
after Emergency scanning for protecting patient data from being accessed by
unauthorized users.
 To Switch Users
If Password Protection is enabled, switching users is allowed without restarting the system.
1. Press Power on/off key,-system will display a confirmation dialog box.
2. Select User from the confirmation dialog box. A login information dialog box will be
displayed providing access to change user.
3. Select Change User and this brings up the system login dialog box.
4. Select another user from the User Name drop-down list and then enter password to login.
 To power off:
1. Press the Power on/off key on the top left of control panel and the system displays a
confirmation dialog box.
2. Select "Shut Down" from the confirmation dialog box.
If the system is unresponsive, a long press of the Power on/off key will shut down the system
directly.
NOTE:
Turn off and unplug the device after use.
1.
Please unplug the AC adapter from the power socket and disconnect the battery prior
2.
to storage.
 Sleep mode
The system will enter a sleep mode that maintains exam information while using minimal battery
power. There are three events that can invoke sleep mode:
 Close the cover of the system without powering-off the system.
 No user input for a configurable amount of time. Please see System Set-up to configure
this time.
 Pressing the Sleep button on the confirmation dialog box when powering off.
- 19 -
Getting Started