Utilities; Set-Up - EDAN Acclarix AX4 User Manual

Acclarix AX4 Diagnostic Ultrasound System User Manual

9 Utilities

The Utilities hard key provides access to setup, screen adjust, connectivity and maintenance
software. Each of these is described in separate sections below.

9.1 Set-up

The Set-up function is divided into several sections, accessed by separate touch screen buttons
 System Set-up: Described in the remainder of this section.
 Presets: Supports edits of preset organization and image preset. See section 8.3.1
 Comments: Supports edits of comment presets. See section 8.3.2
 Body Mark: Supports edits of Body Mark presets. See section 8.3.3
 Measure: Support edits of Measure presets. See section 8.3.4
System setup is used to configure parameters that are unrelated to presets. Generally, there is one
value of each system setup parameter that is shared across all presets.
Entering/exiting Setup:
Press Utilities on the control panel, the Setup touchscreen button, and then the System
touchscreen button to access system setup.
Reloading Factory Default Set-up:
1. Press "Restore Factory Settings" on the Set-up screen, you are prompted Restore System
Setting to factory default? This will erase all current system setting.
2. Press Yes to restore to factory default, and press Cancel to cancel.
- 109 -
Utilities