Table of Contents
Advertisement
Acclarix AX4 Diagnostic Ultrasound System User Manual
Note:
Pluging and unpluging the MTC should be done while the system is frozen or
1.
turned off.
When connecting MTC to the system while in a frozen state, activate the
2.
transducer needed. Refer to section 8.2 for detail information.
3.5 Powering on/ off
Please review and follow the steps described in the Section 12.1Daily Checklist prior to powering
on the system.
To power on:
1. Connect the system to a hospital grade power supply, or use the battery as the power supply.
2. Press the Power on/off key on the top left of the control panel.
To Login
If Password Protection is enabled (see section 9.1.5), the system displays a Login dialog
when booting up the system. Type in or select user name from the User Name drop-down list,
then enter password and click Login.
For emergency use, click on Emergency to log in directly without entering user name and
password.
Figure 3-8 Connect to the MTC
- 18 -
Getting Started
Advertisement
Table of Contents
