EDAN Acclarix AX4 User Manual page 107

Acclarix AX4 Diagnostic Ultrasound System User Manual Presets
8.3.1.1. Editing Image Settings
Figure 8-5 shows an example imaging set-up screen for imaging parameters. This example shows
the screen for editing the B-mode settings for the C5-2Q Abdomen exam preset.
Figure 8-5: Example Set-up Screen for Imaging Parameters
Transducer and Exam Preset: There are drop-downs at the top of the screen for selecting the
transducer and Exam Preset you want to edit. Each transducer has its own set of exam presets,
and these two drop-downs let you select which exam preset, on which transducer, you want to
edit.
Image Modes: The next row of controls show tabs for each imaging mode. These let you select
which imaging mode you want to edit for the current exam preset. The example shows the
B-mode tab selected.
The image mode is divided into two sections. Parameters that have one value for each preset are
shown on the left. Parameters that are associated with Image Types are shown on the right.
Image Type: Each imaging mode has a set of image types. For example in B-mode the types are
Detail, General, and Penetration. While imaging, the image type lets you quickly change the
aesthetic look of the image without changing settings like depth or invert status. The right side of
the preset set-up screen shows a tab for each image look. The parameters shown below those tabs
let you customize that image type for the current preset.
8.3.1.2. Configuring Patient Info
Figure 8-6 shows an example of the Patient information configuration page. This page allows you
to configure which demographic fields are shown for each exam preset.
- 100 -