EDAN Acclarix AX4 User Manual page 57

Acclarix AX4 Diagnostic Ultrasound System User Manual
 There are two image modes: Volume imaging mode and multi-slice imaging mode. Figure
5-4 shows Volume Imaging Mode in quad screen with a Baby Face volume rendering.
 Quadrant A shows a slice through the data that mimics the original ultrasound image.
 Quadrant B is orthogonal to A, as if the transducer had been rotated 90 degrees.
 Quadrant C is orthogonal to A and B, showing a slice that is parallel to the transducer
face.
The icon at the bottom-right shows the position of each slice with respect to the full 3D
data set.
The following table shows the touch screen controls that are available in Volume Imaging Mode.
Name Control
Volume/
Multi-slice
A/B/C/3D
Single, Dual,
Quad
Reset
Figure 5-4 3D Image Review
Description
These two radio buttons toggle between the Volume
display and the Multi-Slice display.
These four radio buttons select which quadrant is the
focus of the navigation/panning controls.
three orthogonal slices through the volume, while '3D' is
the rendered image.
These three radio buttons switch the display to show 1, 2,
or 4 images at once. Single shows the 3D image, dual
shows the A slice and 3D image, Quad shows three MPR
slices and 3D image.
Reset the operation of rotate and zoom to the initial
condition.
- 50 -
Imaging
A/B/C are