Battery Use - EDAN Acclarix AX4 User Manual

Acclarix AX4 Diagnostic Ultrasound System User Manual

3.3 Battery Use

The system comes with one lithium-ion battery. When it is fully charged it can run the system for
approximately 60 minutes, depending on use. It is automatically charged when the system is
plugged in.
1. If the system will remain unused for more than one week, charge the battery to at
least 75%capacity, take the battery out and store the system and battery separately.
2. During long term storage, the battery should be charged at least once every 3 months
to ensure battery capacity is more than 75%.
To install the battery:
1. Turn off and unplug the system.
2. Close the monitor, turn the system upside down and rest it on a flat stable surface.
3. Put the battery gently to battery compartment, and the button will lock the battery
automatically.
To remove a battery:
1. Turn off and unplug the system.
2. Close the monitor, turn the system upside down and rest it on a flat stable surface.
3. Slide the battery button to unlock the battery.
4. Take the battery out.
CAUTION
Figure 3-3 Installation of the Battery
- 15 -
Getting Started