EDAN Acclarix AX4 User Manual page 24

Acclarix AX4 Diagnostic Ultrasound System User Manual
To disconnect a transducer:
1. Toggle the locking handle to the top position to unlock the transducer connector.
2. Firmly grasp the transducer connector and carefully remove it from the system port.
3. Store transducer in its protective carrying case prior to transport.
Do not touch the pins of the transducer connector.
1.
Broken or bent connector pins can cause image artifacts. Do not use a transducer
2.
with broken or bent pins.
Multi-Transducer Connector (MTC)
The Multi-Transducer Connector (MTC) is an optional addition to the system that allows up to
three transducers to be connected to the system simultaneously. The MTC can be mounted to
the optional cart, or lie flat on an adjacent table.
Figure 3-6 Lock the tansducer locking handle
Figure 3-7 Unlock the Tansducer Locking Handle
CAUTION
- 17 -
Getting Started